Small Parts

What to do when just one little part could make your installation perfect? Your local hardware store simply does not carry these items so you think you're out of luck? Here you go! Lock strike plates, iron spindles, screws, spacers and little do-dads you may want or need. If you need something that is not listed, just ask.  I probably have it.
 


Item #+ Item
DSP1003 Spacers for Antique Doorknobs

Spacers for Antique Doorknobs

Although antique doorknob spindles allow for a wide variation in door thickness, sometimes a little bit more help is needed. These spacers go between the doorknob and the door plate to make the doorknobs fit more snugly. These will fit all but the tiniest antique doorknob collar. About 1/32"... click picture for more info
DSP1007 Skeleton Key for Antique Mortise Lock

Skeleton Key for Antique Mortise Lock

Some people like to have a skeleton key for their mortise locks and some don’t use the deadbolt function.  With this in mind I have listed several mortise locks without a skeleton key and have noted with that particular lock that you can purchase one with this Item Number.  If you want more than... click picture for more info
DSP1010 Iron 1/4" Spindle for Antique & Vintage Doorknobs

Iron 1/4" Spindle for Antique & Vintage Doorknobs

These spindles have been cleaned and all the screw holes have been tapped so that the new set screws sold here insert easily.  If you are using your own old screws you might want to request that the holes not be tapped in the Comments section at checkout.  The spindles come in various lengths but... click picture for more info
DSP1015 Arts & Crafts Mortise Lock Thumb Turn Knob

Arts & Crafts Mortise Lock Thumb Turn Knob

This is a lovely brass or bronze thumb turn that could have been manufactured anywhere from 1910 – 1940.  It has a simple shapely backplate and a large knob that is knurled on the edge.  This piece can be used to throw the deadbolt on smaller mortise locks or is also appropriate with the large... click picture for more info
DSP1026 Ornate Cast Brass Closet Turn Knob

Ornate Cast Brass Closet Turn Knob

In days long ago the knob inside a closet was a simple shaped grip rather than a full size doorknob but there is nothing simple about this one!  Whether you want to impress your guests as you open the coat closet or as a private joy for a bedroom closet, you’ll smile each time you open the door!... click picture for more info
DSP1078 Ornate Corbin “Ceylon” Cast Bronze Strike Plates - Polished

Ornate Corbin “Ceylon” Cast Bronze Strike Plates - Polished

These ornate strike plates were made by P & F Corbin around the turn of the century for their Ceylon design hardware. Don’t restrict them to just Ceylon hardware though! This design will go with a multitude of mortise locks. The design is on one side only and they are reversible for right or... click picture for more info
DSP1087 Ornate Replacement Lock Face or Strike Plate

Ornate Replacement Lock Face or Strike Plate

This thick bronze face plate is from a late 1800’s entry mortise lock made by Kean & Doty.  Use as intended if yours is lost/broken or I have also seen them used for an ornate strike plate for the matching lock (you would have a little extra hole on top of the strike opening though).  The plate... click picture for more info
DSP1099 Ornate Norwalk Antique Strike Plate for Mortise Lock

Ornate Norwalk Antique Strike Plate for Mortise Lock

Norwalk produced some very Egyptian influenced hardware during the late 1800’s and this strike plate is no exception. Made of thick cast bronze the incising is still crisp and clear on both sides even after all these years. The strike/deadbolt holes have been cut sometime in the past as was... click picture for more info
DSP1103 Split 1/4” Doorknob Spindle for Antique Mortise Locks

Split 1/4” Doorknob Spindle for Antique Mortise Locks

This is an iron split spindle that allows the doorknobs on either side of a door to turn independently.  It is used for mortise locks that have push buttons or tabs on the face of the lock.  When locked the knob on the inside will retract the strike but the knob on the exterior will not.  The... click picture for more info
DSP1105 Split 1/4” Doorknob Spindle for Antique Mortise Locks

Split 1/4” Doorknob Spindle for Antique Mortise Locks

This is an iron split (or swivel) spindle that allows the doorknobs on either side of a door to turn independently.  It is used for mortise locks that have push buttons or tabs on the face of the lock.  When locked the knob on the inside will retract the strike but the knob on the exterior will... click picture for more info
DSP1112 Inside Closet Handles – One Nickel and One Brass – Your Choice

Inside Closet Handles – One Nickel and One Brass – Your Choice

Why waste a beautiful knob on the inside of the closet? These hold your outside knob in place and provide a method of getting out of the closet if you happen to be inside and close the door :o) They are both made of steel and one has brass plating with the other nickel. Both have mellowed with age.... click picture for more info
DSP1129 Solid Brass 3/8” Entry Doorknob Spindle for Antique Mortise Lock

Solid Brass 3/8” Entry Doorknob Spindle for Antique Mortise Lock

This is a hard-to-find spindle in that it does not rotate in the middle. Made of solid brass it will give years of service since there is no chance it will break in half. Includes original set screws. Spindle is 3/8” square and 4-1/4” long.  Widest screw spacing 3-5/8" and shortest screw... click picture for more info
DSP1132 New Dark Bronze Finish Strike Plates

New Dark Bronze Finish Strike Plates

This is a new reproduction strike plate that is indispensable for replacing those that are frequently left behind during salvage operations.  Made of brass it has a matte bronze finish that goes with a multitude of associated hardware. They are reversible by simply turning them over. Matching... click picture for more info
DSP1134 Two Part Entry Thumb Latch Spindle

Two Part Entry Thumb Latch Spindle

These spindles are made of two separate pieces that fit together to form a square.  It is used with the lock that has a thumb latch handle on the outside and a door knob on the inside. The two pieces screw into the knob and the bend on the end of one keeps the spindle from going through the lock –... click picture for more info
DSP1135 Vintage Non-Handed Dutch Door Quadrant - NOS

Vintage Non-Handed Dutch Door Quadrant - NOS

This great piece of hardware was made by Ives around 1940-1950 in New Haven, Conn – the good old USA! It has never been used (New/Old Stock) and comes in its original box. You don’t need to worry if your door is right or left handed. It works with either one! Made of cast brass hand polished for a... click picture for more info
DSP1136 Vintage Russwin Keyed Cylinder for Mortise Lock

Vintage Russwin Keyed Cylinder for Mortise Lock

This cylinder lock fits openings 1-1/8” and comes with two Russwin master keys. The top of the lock is bright chrome and neither the lock nor the keys appear to have been used. Keys are a bit tight going in and out but will loosen with use. See small side view photo for the depth of the cylinder.
DSP1137 Two Keyed Alike Cylinder Locks for Vintage Mortise Locks

Two Keyed Alike Cylinder Locks for Vintage Mortise Locks

These cylinder locks fit openings 1-1/8” and are keyed alike with two keys included. The top of one is brass and the other silver (nickel?) with patina. The silver one has a little ding under the keyhole but other than that they are in fine condition. See small side view photo for the depth of the... click picture for more info
DSP1138 Unusual Keyed Cylinder Lock for Vintage Mortise Locks

Unusual Keyed Cylinder Lock for Vintage Mortise Locks

This cylinder lock fits a 1-1/8” opening but does not screw in like the standard type. Instead there are two prongs that would go into notches in the mortise lock casing. Made by PPG Industries I’ve never seen one like it. If you have a mortise lock that takes this cylinder I’m sure you’ve had... click picture for more info
DSP1139 Bronze Toned Strike Plate for Antique/Vintage Mortise Locks

Bronze Toned Strike Plate for Antique/Vintage Mortise Locks

This is a solid steel strike plate with worn mellow bronze plating. Perfect for the antique hardware sold here! Reversible for right or left hand doors. Just turn it over. 3-3/8” high x 7/8” wide excluding tongue Strike opening 9/16” wide x 5/8” high Deadbolt opening 7/16” wide x 1-3/16” high Bar... click picture for more info
DSP1140 Copper Tiger Stripe Strike Plate for Entry Mortise Locks

Copper Tiger Stripe Strike Plate for Entry Mortise Locks

Hard to find an entry strike plate in such fabulous condition! It is made of solid copper with japanned black “tiger striping”. Reversible for right or left hand doors. Just flip it over. 5-1/2” high x 1-1/8” wide (tongue adds 3/4”) Strike opening 5/8” wide x 1-1/8” high Deadbolt opening 1/2” wide... click picture for more info

Copyright © 2016 Historic Home Hardware and Antique Doorknob Hardware. Powered by Zen Cart
Parse Time: 0.234 - Number of Queries: 250 - Query Time: 0.0766505690765